HD29 Heat Detector
Power supply | from ACL (28 - 36 V) |
Detector trip temperature | from 54 to 70 °С |
LED flashing frequency in stand-by / "Fire" mode | 0,2 Hz/2 Hz |
Detector overall dimensions of the with base, no more than | Ø94 × 58 mm |
Detector weight, including base, no more than | 120 g |
Operating temperature range | from -30 to +55°С |
Average service life, at least | 10 years |
The detector represents temperature direct measuring device with two ways of fire detection: by maximum temperature and by rate of temperature rise.
The detector performs the following functions:
- ambient temperature measuring;
- temperature change rate calculation;
- measuring results processing using special algorithms and "Fire" signal transmission to receiving and control panel;
- detector operation mode indication;
- functioning test with a button or an OT-1 optical tester.
Power supply and data exchange of the detector is performed via a two-wire ACL.
The detector does not respond to humidity changes and to the presence of flame and natural or artificial light.
The detachable connection between the sensor and the base provides easy installation, mounting, and maintenance of the detector.
Circular contacts allow easy mounting of the detector without orientation with respect to the socket.
To facilitate ACL shielded cables installation, cable mounting plate is provided on the base (option).
It can be mounted on dropped ceiling using a special socket combined with mounting rings.