UDP 513-11 prot.R3
|Power supply||from ACL|
|Button pressure force, at least||25 N|
|LED flashing rate in "Standby" mode||0,25 Hz|
|LED flashing rate in "Button-down" mode||2 Hz|
|Module overall dimensions, no more than||88õ85õ46 mm|
|Weight, no more than||150 g|
|Ingress protection rating||IP31|
|Operating temperature range||from -40 to +55°Ñ|
|Average service life, at least||10 years|
Design and production method of the remote start device is suitable for multiple activation and deactivation and ensures trouble-free operation of the device for almost unlimited period.
The UDP 513-11 prot. R3 remote start device consists of a base, case, and a protective cover. Cover is equipped with a protective element, which needs to be squeezed out by pressing it in the center to provide access to the actuating element. The base includes a PCB with radioelements and a terminal block for two-wire ACL cable.
The UDP 513-11 prot. R3 remote start device sends the event message to the alarm control unit when the UDP actuator unit is pressed. A color drop-down flag visually confirms that the remote start device actuator is pressed.
The generated signal is cleared by the key included in scope of supply. In order to return the actuator, insert the key into a hole located in the button center and press on it until the actuator clicks off.
Red LED informs about remote start operating modes and operable condition; in standby mode, it blinks with frequency of 1 time in 4-5 seconds; in button-down mode - it blinks twice a second.
Power supply and “button pressed” signal are transferred from the remote start device via ACL.
Modern design and simplicity of use.
UDP 513-11 prot. R3 remote start device is manufactured in accordance with GOST R 53325-2012:
- Yellow colour - signs referring to fire suppression.
- Orange colour - signs referring to smoke exhaust.
- Green color - evacuation routes unblocking
- White and blue colors - are not regulated, it is possible to order any title such as “police”, “calling security” and others