IPR 513-11 prot. R3
|Power supply||from ACL (28 - 36 V)|
|Button pressure force, at least||25 N|
|LED flashing rate in "Fire" mode||2 Hz|
|Module overall dimensions, no more than||88х86х45 mm|
|Weight, no more than||100 g|
|Operating temperature range||from -25 to +55°С|
|Average service life, at least||10 years|
Design and manufacturing process of the detector are designed for multiple activation and deactivation and ensure the device trouble-free operation for almost unlimited period of time.
The IPR 513-11 prot. R3 addressable manual detector consists of a base, case, and a safety cover. The base accommodates a PCB with radio elements and a terminal block for two-wire ACL cable.
The manual detector transmits a “Fire” signal to the fire alarm control unit when the button is pressed.
The “Fire” signal is cleared by reset of the button by means of the key included in the scope of supply. In order to return the button, insert the key into a hole located in the button center and press on it until the button clicks off.
A red LED is provided to indicate operating conditions and trouble-free operation of the addressable manual detector, which flashes once every 3-5 s in “NORMAL” state and twice every 1 s in “FIRE” state.
Power supply of the detector and transmission of the “Fire” signal are provided via ACL.
Design of the detector provides the possibility of sealing.
The IPR 513-11 prot.R3 detector is manufactured in a red case.